Home Caution: If you have items in your cart, just close this window when finished.
*SAFETY WARNING* ALL MANUFACTURERS WARRANTIES ARE VOIDED WHEN GO-PED® IS CHANGED OR MODIFIED IN ANY WAY. INCREASING THE SPEED OF THE GO-PED® IS AT YOUR RISK ONLY. THIS HIGH PERFORMANCE MODIFICATION IS INTENDED FOR EXPERIENCED GO-PED® RIDERS AND ONLY WITH COMPLETE SAFETY GEAR.THESE INSTRUCTIONS ARE PROVIDED AS A MEANS OF REFERENCE AND ARE TO BE USED SOLELY AT YOUR OWN RISK.Meyer Distributing®, LLC is not responsible for any outcome, favorable or not, that may occur by utilizing the following procedures.

 !  Alcohol / Methanol

Alcohol has much different characteristics than regular gas. It burns cleaner, faster and cooler. It is also more expensive than regular gas and you must use an alcohol carb. After you get done running alcohol you must "purge" the fuel out of your motor and carb by clamping off your fuel tank like and removing it from the carb, then you must hook up some sort of device to run normal fuel through it to clean out the carb. If you let alcohol sit in your carb it will gum it up and you will need to rebuild or replace the carb. DO NOT LET YOUR MOTOR SIT OVER NIGHT WITH ALCOHOL IN THE CARB.

 !   Technical Articles

HP Carburetor Kit Installation
Air Filter Oiling
T-6 Flywheel Puller
Tanaka Timing Advance Key
Zenoah Timing Advance Key
Goped Wheel Adjustment
Goped Tire Replacement
High Performance Carburetor Installation and Tunings
General High Performance Carburetor Tuning
G230RC G260 SK27 HE26 TUNING
Spindle Removal
Alcohol Methanol